Be careful! when useing bathroom shower glass
Be careful! Precautions for the use of semi frameless shower
With the passage of time, the semi frameless shower has slowly begun to enter thousands of households, and the area of the shower room is not very large, it takes up a small space, and is widely liked by everyone, but what should we pay attention to when using the bathroom shower glass? ? Let me tell you about it. The semi frameless shower has slowly entered into thousands of households, but what should we pay attention to when using it? Let me tell you about it. 1. How to deal with water leakage in the shower room (1) Check whether the waterproof tape in the shower room is installed properly. (2) Check whether the glass glue is applied between the shower room, the bottom basin and the wall. (3) Check that the gap between the lower basin and the wall is well sealed.
(4) Check whether the water separator is installed properly and the connection of the drain pipe is sealed. 2. How to deal with the unsmooth movable door of the shower room (1) Check whether the pulley is damaged, whether the track is deformed, and replace it if there is any. (2) Check whether the pulley is tightened, and whether the eccentric position of the eccentric pulley is consistent, tighten and adjust. (3) Whether the movable door wheel or glass is jammed by foreign matter. (4) If none of the above is the cause, check whether the upper and lower rails are installed in place, check whether there is any deviation in the distance between the upper and lower holes of the glass, and also add lubricating oil to make the door smoother. 3. How to deal with cracks on the top or bottom of the shower room after the movable door is closed (1) Check the parallelism of the movable door, adjust the base, or adjust the eccentric pulley to achieve parallelism. (2) Check whether the verticality is deviated during installation, reinstall and adjust if there is any deviation. 4. How to deal with poor drainage or stagnant water in the bottom basin of the shower room (1) Check whether the drain and drain pipe are blocked or not smooth. (2) Check whether the ground is level, whether the base installation is level, and adjust it if it is uneven. The above are the precautions collected by the editor about the bathroom shower room.
Please pay more attention when using!
Causes of self-explosion of bathroom shower glass
Bathroom glass seems to give people a sense of safety in the senses. However, judging from the number of bathroom glass bursts reported by the media each year, this kind of shower room self-explosion is by no means an exception. So what exactly caused the glass burst?
1. Inferior tempered glass is used, and the glass itself does not have 3C certification
The ability of toughened glass to withstand sudden changes in temperature is 2 to 3 times higher than that of ordinary glass, and it can generally withstand temperature changes of about 220°C. The impact strength of toughened glass is 3-5 times higher than that of ordinary glass. The inferior tempered glass has a low firing temperature during the production process, and does not form sufficient strength, and will burst due to high temperature or collision during use. Due to the low price of inferior tempered glass, a few companies use semi-tempered glass or hot-bent glass to counterfeit tempered glass to reduce costs, but it brings serious safety hazards.
2. Tempered glass is twisted due to manual installation or use
During the processing, transportation, storage and construction of the glass surface and edges, defects such as scratches, blasting, and edge bursting may occur, which may cause stress concentration and cause the tempered glass to explode.