What are the precautions for buying a shower enclosure
1. Generally 900mm*900mm is appropriate. If the family is fatter, it can also be made into 1000mm*1000mm, or the bathroom space is limited, 850mm*850mm can also be made, but it is best not to be smaller than 800mm*800mm. 2. shower room height: usually the ceiling height is 2400mm, so the shower room height is mostly 1800mm~2000mm, and the standard height is set at 1.95m (1950mm) and 1.9m (1900mm). It can also be carried out according to the height of the family and the actual space. The adjustment also needs to pay attention to the position of the shower, too low will easily splash water out, too high will hinder the appearance and affect the air permeability. I hope my answer can help you ###The most basic requirement for the size of shower room is that people must have enough space when entering the shower room, and there can be no feeling of limited space, so the general size of the shower room is 900 *900*1900mm. If you install a screen, the standard size is between 1000-1600, and other shower rooms such as arc and diamond-shaped, the standard size is generally 900*900 or 1000*1000, and there are also special-shaped shower rooms, which are based on actual conditions. Do it in size, but the principle is not to appear too crowded.
What are the precautions for buying a shower room
Firstly is quality,second is shower enclosure price.The precautions for purchase of shower room are the following: When consumers choose shower room, from the perspective of safety and durability, they must choose tempered glass products. However, the appearance of tempered glass is the same as ordinary glass, and it is difficult to distinguish with eyes. Therefore, when buying a shower room, you must choose brands and merchants with large scale, high credibility, and guaranteed after-sales service to ensure you can buy high-quality products. Hinge-style shower rooms are more popular. According to the way of opening and closing the door, shower rooms are divided into sliding rail type and hinge type. Early shower rooms were all slide rails. Slide rails were installed on the base and top of the shower room, and the door was embedded in the slide rails to slide back and forth to open and close. Because it is easy to accumulate dirt on the slide rail or fall into the hard object, it is difficult to clean up, which will make the door open and close and cause damage. In addition, there are shortcomings such as loud noise when the slide rail is pushed and pulled, so now the higher-grade shower rooms have generally been upgraded to the hinge type. Hinge shower rooms generally adopt a borderless design with a simple and smooth appearance and are generally welcomed.