thermally broken aluminum window manufacturer
thermally broken aluminum window aluminum windows manufacturer
Design shortcomings of thermally broken aluminum window aluminum windows manufacturer: an extra layer of insulating aluminum alloy doors and windows system
There are two ways to put this layer indoors in China. One is anti-theft, and the other is easy to disassemble. The second reason is that it exists, especially in high-rise buildings. As for the anti-theft function, it is completely unnecessary.
An externally opened window with insulating glass on the outside, the heat insulation profile system must use two-way structural profiles, and unidirectional ones are also possible. It is difficult to divide the force into two points if a large amount of hollow glass is pressed on the outside. The heat-insulating thermally broken aluminum window aluminum windows manufacturer door and window system is a composite structure, no link can be weak, as long as one link is weak, the entire frame system can play a role.
As a feature of the heat-insulating aluminum alloy door and window system, the structure has undergone qualitative changes due to design defects, which cannot be understood in the traditional installation of the home improvement process. This is a very critical point.
3. The shortcomings of the acceptance of aluminum alloy doors and windows: the result of the brutal operation, the handle is moved up to 30 degrees
During the transportation process of the doors and windows, the project doors and windows are installed. When the doors and windows of a car are removed, it will be found that there is basically no first-level constructor|hands on them. There are bumps during the transportation. If there are bumps, handle them. It is a fatal injury, so there will be no such thing in the door and window factory.
When it comes to hardcover, we generally say that hardcover is a high-end room, but the characteristics of the interior decoration workers: do not understand doors and thermally broken aluminum window aluminum windows manufacturer, and often choose high-end door and window systems for hardcover projects, but do not understand the general decoration, and wait until the end of the hardcover At that time, the small owner would find that the hardware of the doors and windows should have been closed and opened in this way, but in the end they found that the handle was moved up to 30 degrees, and the hand moved up when it was opened. This was improper use by the interior workers and brutal operation the result of. This is the case when most small owners see their own doors and windows when they move in. I believe it is difficult to accept.
Hardware has two major functions, one is to lock the wall and the other is to bear the weight. A systematic process, as a door and window, from the factory to the construction site, design to transportation, installation, and acceptance, including the replacement of problems, including the owner's individual requirements for doors and windows. In the whole process, there needs to be a perfect way of expression.
4. The collision problem of aluminum alloy doors and thermally broken aluminum window aluminum windows manufacturer: it must be solved in time
When the thermally broken aluminum window aluminum windows manufacturer sash is less than 650, there will be collisions between the outside and the main rubber strip, and this collision is very fatal. What is the sound of the knock? When I hear a click when it is turned on, how will the worker solve it? Quickly hit a few times with his hands. Is there any sound? Why is there no sound? Maybe the tape has been knocked off. If this part is knocked off , The main sealing of aluminum alloy doors and windows cannot be realized.
The wind pressure resistance performance of doors and windows has always been relatively simple. Professional door and window factories must provide corresponding calculation books. I went to Shandong two days ago to see a project. The strengthening of the middle tower must be a protrusion on the rigid profile, but The protruding part must be connected to the wall correspondingly. The two ends must be fixed. When the reinforcement is quite deep below the plane, there is a problem. If one head is there, one is fixed, and the other is shaking. This reinforcement is absolutely necessary. Some profiles are bought with money, and they will be meaningless if used improperly.